Tag Archive : pump

Inflatable pool float

How to inflate the float in the inflatable pool without an electric pump?

When I ran our new inflatable pool for the first time, I ran everything manually, I just want to say I never want to do it again. These are the quick and easy ways I have found to inflate an inflatable swimming pool in such a short time.

The easiest way to inflate an inflatable pool is to use an electric air pump. Other simple options include using a vacuum cleaner, air compressor, blower with water bottle, hand pump, portable or free-standing. Pump, big bag or manually inflate the inflatable pool.

Some of these methods are simpler than others, and each method has its own operation. Trust me, using these methods like me can save you time and effort. Show you more on the website. Read this article about archery!

How to inflate an inflatable swimming pool-tips and tricks

When I inflated our new inflatable swimming pool for the first time, everything was done by hand. Suppose I don’t want to do this anymore. These are the quick and easy methods I have used. Facts have proved that the inflatable pool is easy to inflate.

The easiest way to inflate an inflatable pool is to use an electric air pump. Other simple options include the use of vacuum cleaners, air compressors, and hair dryers. Inflate the inflatable pool.

Use a bottle by hand, a hand pump or a foot pump, a large bag or yourself. Some of these methods are easier than others, and each method has its own steps. Trust me, by practicing some methods like me, you will save your time and energy.

The easiest way to inflate an inflatable pool

The easiest way to inflate an inflatable pool is to use an electric air pump. When we had guests staying overnight, I used the ones I had to inflate on the air mattress. He is small, but he can do his job. I can inflate a 10 x 5 foot inflatable swimming pool in a few minutes.

This is the Coleman QuickPump I recommend (Amazon link). I think the cost of this small pump is about $30. I have been there for 6 years. It is reliable, beautiful and compact, so it is easy to store.

These air pumps have various accessories that can be installed.On the microphone.Each inflatable pool head has an accessory, and I was able to fill each of the 12 inflatable pools by category with one of the accessories that came with the air pump.

  • Connect the electric air pump to an ordinary household socket (120 V). 
  • If necessary, use an extension cord. 
  • Use appropriate fittings to connect the air pump to the air inlet valve of the charging pool.
  • Turn on the electric air pump.
  • Fill all air chambers (several inflatable pools
  • Close the pool air inlet

All the how to blowup an inflatable pool float I tested were locked for a long time. In my experience, rapid inflation may be required every other day.

How to inflate the inflatable pool without a pump

To inflate the inflatable pool without a pump, you need to use an air compressor, a store vacuum cleaner, a hair dryer with a water bottle, a big bag method or manual inflation without a pump, electric, Manual or permanent.

The best option is to use an air compressor, compressor or blower. If not, blowing the big bag/water bottle will work. Let’s take a look at these methods and the steps to use them. Blow up the inflatable swimming pool.

Use an air compressor to inflate the swimming pool.

To use an air compressor to inflate the pool, you need a suitable nozzle and install the compressor at the air inlet of the pool. Most compressors come with fittings, but you need a fitting wide enough to open the intake valve to fill the filling bowl.

If you don’t have a compressor, you won’t buy a pool inflator. An electric pump would be a much cheaper option. However, if you already own a compressor, you may need suitable accessories. Check out this airsoft accessory kit on Amazon to see which accessories fit. Steps to fill the aeration tank with an air compressor:

  • Locate the pool inlet valve and open it.
  • Use a suitable connector to connect the air compressor hose to the intake valve.
  • The valve must not be blocked by the air valve seal.
  • Some inlet valves have replacement parts Plastic.
  • This prevents air from escaping and preventing air flow.
  • Turn on the compressor and start to inflate the swimming pool.
  • When the pool is full of air, turn off the compressor and disconnect it from the pool inlet valve.
  • If the inflatable boat is sealed, don’t over-inflate the swimming pool and turn off the compressor.
  • Close the tank inlet valve to prevent air from escaping.

I am lucky to be able to use this method on the smallest compressor. This is a photo of the little pancake compressor I am using. It can be easily transported and inflated in a few minutes.

Fill the pool with a carp vacuum cleaner.

To use a tent vacuum cleaner to inflate the inflatable swimming pool, simply inflate the tent vacuum cleaner and then connect the hose from the tent vacuum cleaner to the air inlet of the inflatable swimming pool. Balloons, but I don’t think it is necessary.

For this, the vacuum hose must be firmly connected to the air inlet valve on the filling container. Air is sucked into the inflatable boat to speed up the inflation process. The practical application of this method.

The inflatable boat has a hair dryer and a water bottle.

This is an interesting technique, but it does require some work on the hair dryer. Cut off the top of the plastic bottle and connect it to the end of the hair dryer.

The tape is fine. Make sure that all the air from the hair dryer passes through the nozzle of the water bottle (the part of the nozzle where you drink the water) and enters the inflator.

Insert the water bottle attachment into the air inlet valve of the inflatable boat, and then turn on the blower. It worked well and when I tried it, I was very surprised.

Use a blower to inflate the inflatable pool

 this method of blowing leaves is very similar to vacuuming a store. Move the blower to the inlet valve of the feed bowl and open it. I haven’t tried this method myself.

But I found a cool video showing how it works, so I want to add this part here for those who only have leaf blowers.

How to inflate the inflatable pool-tips and tricks

When I inflated our new inflatable pool for the first time, I did all the work by hand, I just want to say that I never want to do this again. These are quick and easy methods. The method I use. Facts have proved that the inflatable pool is easy to inflate.

The easiest way to inflate an inflatable pool is to use an electric air pump. Other simple options include the use of vacuum cleaners, air compressors, and hair dryers. Bottles that can be manually inflated, hand pumps or foot pumps, transport bags or pools.

Some of these methods are simpler than others, and each method has its own steps. Trust me, some of my skills can save you time and energy.