Netgear routers are wonderful networking devices that facilitate users with the WPS configuration. By using the WPS button, users can do Netgear Nighthawk setup and connect their client devices to the extender. However, many users have complained that the WPS light on their router keeps blinking. If you are also struggling with the same issue, then we’ve got you covered. In this post, we will guide you on how to get rid of the problem in the blink of an eye. Continue reading.
Fixed: WPS Light on Router Keeps Blinking
Before you delve into deep technicalities and execute any advanced troubleshooting hack, reboot your Netgear router. For this, you need to unplug it from its respective wall socket, wait for a while, and plug it back into the wall outlet. However, if it fails to resolve the issue for you, have a walk through the below-mentioned troubleshooting tactics:
- Check Power Outlet
Is the power outlet used for powering up your Netgear router in working condition? Probably not. So, check for the same. If our assumption comes true, then consider taking any one of the following steps:
- Repair the current wall socket.
- Plug your Netgear Nighthawk router into another wall outlet.
- Bring the Router Close to the Modem
Have you placed your Netgear Nighthawk router outside the boundary line of the signals emitted by your modem? Looks like you have. That is why the WPS light on your router is blinking. Do you know why? Let us explain.
The modem acts as a source of internet for your Nighthawk router. If the distance between both WiFi devices is too much, then you won’t be able to establish a stable connection between them. Thus, consider bringing them close. However, the Nighthawk router should not stick to the modem. Otherwise, their WiFi signals will clash.
- Update the Router Firmware
Netgear rolls out a new firmware version for Nighthawk routers in order to streamline their performance. It looks like you didn’t see the pending firmware update notification. Well, it is better late than never. Update the firmware of your Netgear Nighthawk router right away.
Walk through the following guidelines in order to login to Nighthawk router and update its firmware:
- Ensure that the connection between your Netgear Nighthawk router and the existing modem is stable.
- Now, get access to a PC.
- Launch a web browser and move to its address bar.
- Type routerlogin.net and press the Enter key.
- When welcomed by the Netgear router login page, enter the default admin details.
- You will be taken to the Netgear Nighthawk dashboard.
- Click Settings > Firmware Update.
- Your Nighthawk router will check for the firmware update.
- Follow the on-screen instructions to get your device updated if a new firmware is available.
In this manner, you can update the firmware of your Netgear Nighthawk router.
- Relocate the Router
The WPS light on your Nighthawk router might also blink if your device is not placed at an optimal location. In that case, you need to change the router’s location. While relocating the router, keep it away from:
- Bluetooth devices: keyboard, mouse, speakers, etc.
- Devices emitting radio-wave frequencies: refrigerators, televisions, microwave ovens, cellular phones, treadmills, etc.
- Objects containing a large amount of water:fish tanks, indoor waterfall walls, plants, etc.
- Metal Objects:aluminum studs, metal doors, mirrors (because they have metal polishing).
Apart from the aforementioned things, place your Netgear router away from corners, thick concrete walls, and timber blocks.
- Reset the Router
If nothing seems to work in your favor, then chances are that you’ve performed incorrect Netgear router setup via the WPS method. Thus, you need to set up the WiFi device again. However, before that, delete the current settings from your router.
Don’t know how to delete the current settings from the Netgear router? Read the following guidelines:
- Ensure that your Nighthawk router is getting adequate electricity.
- Now, disconnect it from the modem.
- Find the Reset button on the Nighthawk router.
- Press the button using a toothpick.
- The settings from your WiFi router will get erased.
Once your Nighthawk device resets, access the Netgear router login page and set it up from scratch.
Has the WPS light on your router become stable? Well, it looks like it has. If this article has helped you in resolving the issue, don’t forget to leave a word of appreciation in the comment section.